16:37
onlineခ်စ္သူ
Galaxy
S3 LTE GT-I9305 Gets Official Android 4.1.2 XXBMD5 Jelly Bean [Manually
Install and Root]
naylinchit
ခ်က္ေဘာက္မွာေတာင္းလုိက္လို႕တင္ေပးလုိက္ပါတယ္။ firmware ကေတာ့
ဆိုဒ္နည္းနည္းၾကည့္ပါတယ္။ က်ေနာ္တက္ႏိုင္သေလာက္ခ်ံဳျပီးျပန္တင္ေပးထားပါတယ္။
မူရင္းဆိုဒ္ကေတာ့ 1.20 GB ရိွပါတယ္။ က်ေနာ္ခ်ံဳထားတာက
735 MB ရိွပါတယ္။ ၄ပိုင္းခြဲျပီးတင္ေပးထားပါတယ္။ root
လုပ္နည္းပါတခါထဲတင္ေပးလိုက္ပါတယ္။
Samsung has rolled out an official update, Android
4.1.2 Jelly Bean with base firmware XXBMD5 to the international LTE
version of Galaxy S3 with model number GT-I9305. The XXBMD5 build is
originally for the users from Germany. Users can grab the update via
Samsung KIES server. Also, users from supported regions can install the
update using Odin flashing tool.
The XXBMD5 Jelly Bean is an
unbranded version of firmware which means it can be downloaded on any
GT-I9305 units.
Firmware details
PDA: I9305XXBMD5
CSC:
I9305DBTBME1
Version: Android 4.1.2
Built date: April,
2013
Region supported: Austria, Belgium, France, Germany,
Hungary, Italy, Spain and United Kingdom
Galaxy S3 users, who
fail to install the update via official method for being region
specific, may follow our step-by-step guide.
IBTimes UK reminds
its readers that it will not be held liable for any damage to the
device. Before installing the firmware, users are advised to verify that
their devices meet following requirements.
Per-requisites
1)
Install USB Drivers for Samsung Galaxy S3 to connect the Android device
with the computer.
2) Enable USB Debugging Mode on the phone to
connect it with the computer and use Android SDK with it. [Press
Menu>> Settings>> Applications. From there navigate and
click on Development option and ensure the USB Debugging Mode is turned
on.]
3) As the tutorial might wipe all data of the phone,
create a backup. If the device is having any custom recoveries such as
CWM/TWRP already installed then backup data using the recovery.
4)
The battery of Galaxy S3 should have charge above 80 per cent.
5)
The device should be factory unlocked and not locked to a particular
carrier.
6) The phone will lose custom ROM with the installation
of official firmware. Additionally, it will lose custom recovery such as
ClockworkMod/TWRP which will be replaced by stock recovery.
7)
The device will no longer belong to a rooted version with the
installation of official firmware.
8) The Android 4.1.2 XXBMD5
Jelly Bean works only on Samsung Galaxy S3 LTE GT-I9305, flashing this
on any other variant might brick the device. Therefore, verify the model
number of Galaxy device by navigating to Settings>> About
Phone>> Model number.
Steps to install Android 4.1.2
XXBMD5 Jelly Bean on Samsung Galaxy S3 LTE GT-I9305
Step-1:
Download Android 4.1.2 XXBMD5 Jelly Bean official update for Samsung
Galaxy S3 LTE to the computer
Step-2: Extract the downloaded
zip file to get a .tar.md5 file along with few other files
Step-3:
Download Odin 3.07 which will help to install the Jelly Bean firmware
on the phone. Extract the zip to get Odin3 v3.07.exe with some other
files
Step-4: Switch off the Galaxy S3 and wait for five to
six seconds for vibration to confirm complete power off
Step-5:
Now place the phone into Download Mode by pressing and holding Volume
Down and Home buttons while pressing the Power button. A warning screen
will appear, now press the Volume Up button to continue to enter
Download Mode
Step-6: Run Odin3 v3.07.exe as an
Administrator
Step-7: Connect the phone to the computer using
USB cable while it is in the Download Mode. A message saying Added will
arrive under Odin's message box indicating the successful connection.
Also, when the device is connected to the computer, the ID: COM in Odin
will turn yellow with the COM port number
Note: If the Added
message does not come then try another USB port, try the one located at
the back side of the computer. In case that too does not work then
re-install USB driver.
Step-8: Now select these files
extracted from I9305XXBMD5 folder to install on the phone
a)
Click the PDA button and select the .tar.md5 file
b) Click the
Phone button and select file with Modem in its name
c) Click the
CSC button and select file with CSC in its name
d) Click the PIT
button and select the .pit file
Note: Ignore the last three steps
(b, c and d) if such files are not found.
Step-9: In Odin,
ensure the Auto Reboot and F.Reset Time checkboxes are selected. But
uncheck the Re-Partition option, select it only when a .pit file is
being used
Step-10: Double check everything and then finally
click the Start button in Odin. The installation process should begin
now and would take about few minutes to complete
Step-11: Once
the installation process is completed, the phone will restart
automatically and soon a PASS message with green background will appear
in the extreme left box at the top of Odin. After the home screen
appears, unplug the USB cable from the phone to disconnect it from the
computer
Samsung Galaxy S3 LTE should now updated with official
Android 4.1.2 XXBMD5 Jelly Bean official update. Head over to
Settings>> About Phone to verify the new software version running
on the device.
Troubleshoot
If Samsung Galaxy S3
I9305 gets stuck at boot animation (after step-11) then place the device
into recovery mode by pressing and holding Volume Up, Home and Power
buttons together. In recovery mode, perform data wiping task by
selecting Wipe data/factory reset then select wipe cache partition. Once
the data wiping task is completed, return to the recovery menu and
reboot the phone by selecting reboot system now. In recovery mode, use
the Volume keys to scroll between options and use Power button to select
the desired option. Also, it should be noted that performing wiping
task will erase the internal memory data of the device.
Those
users who have already upgraded their Galaxy S3 to Android 4.1.2 XXBMD5
may follow our step-by-step guide to root the same. The guide uses
CF-Auto-Root file released by recognised XDA developer, Chainfire.
Steps
to root Samsung Galaxy S3 LTE GT-I9305 on Android 4.1.2 XXBMD5 Jelly
Bean
Step-1: Download CF-Auto-Root file for Samsung Galaxy S3 to
the computer
File name: CF-Auto-Root-m3-m3zh-gti9305.zip
Step-2:
Extract the downloaded root zip file to get a .tar.md5 file within
it
Step-3: Download Odin 3.07 and extract the Odin zip file
to get Odin3 v3.07.exe along with few other files
Step-4:
Power off the Galaxy S3 and place the device into Download Mode. Press
and hold Volume Down, Home and Power buttons together. A warning screen
will appear then press the Volume Up button to confirm to enter Download
Mode
Step-5: Run Odin3 v3.07.exe as an
Administrator
Step-6: Now connect the Galaxy S3 to the
computer using USB cable while it is in the Download Mode
Step-7:
In Odin, lick the PDA button and select
CF-Auto-Root-m3-m3zh-gti9305.tar.md5 file
Step-8: Verify that the
Auto Reboot and F.Reset Time checkboxes are selected in Odin
Step-9:
Double check everything and finally click the Start button in Odin to
begin the installation
Step-10: Once the flashing process is
completed, the phone will reboot automatically and soon a PASS message
with green background will appear in the extreme left box at the top of
Odin. Users may now unplug the USB cable from the phone to disconnect it
from the computer
Samsung Galaxy S3 LTE should be now
rooted successfully on Android 4.1.2 XXBMD5 Jelly Bean.
Download firmware
Download CF-Auto-Root
Download Odin 3.07
အားလံုးအဆင္ေျပၾကပါေစ။
Myanmar Kyat Converter
0 comments:
Post a Comment